When you have a new battery and your car won’t start, and there are no lights, you may find yourself in the position of needing to jump your car. In this case, you will have to follow the proper steps to ensure you do not hurt any other parts or make it even more difficult to get your car up and running again.
⚠️ If It's Broken, Don't Fix It - Get Paid Cash for Your Vehicle ⚠️
Jumping Your Car That Won’t Start
If you realize that you have a “new battery car won’t start no lights” situation, it is time to give your car a little boost to see if it can run properly after being turned on. If your battery has died, using jumper cables can get it back on the road. Make sure that the battery that you are using and the one you are charging has as much voltage as your own, so that the voltage does not get lower during use.
-
Take out your jumper cables
Fthe first step is to get all of your equipment and gear ready to learn how to fix the “new battery car won’t start no lights” condition. You might want to buy a set of jumper cables to keep in the trunk of your vehicle in case anything happens. If you do not have any jumper cables, you might need to borrow some or visit your local mechanic.
-
Place both cars in Park or Neutral
Once the cars are sitting still, place both vehicles in the Park or Neutral position and turn off the ignition in both cars. This ensures the cars do not move and that they will not roll away and harm anyone around you. Keeping your car still can ensure you fix the “new battery car won’t start no lights” condition.
-
Attach a red clip to the POS terminal of your battery
The positive terminal of your battery will either be marked by “POS” or the “+” sign, and will be bigger than the negative terminal. This will make it easier to find and can help you find out why you have a new battery but the car won’t start.
-
Attach the red clip to the positive terminal on the other car
You need a connection to send the power and the voltage between the two vehicles. Without attaching a red clip to each car, the power would only be flowing in one direction. By connecting a red clip to both positive terminals, the positive electricity will flow between both vehicles to fix the “new battery car won’t start no lights” condition.
-
Attach one of the black clips to the negative terminal on the other battery
The black clips and the negative terminal will be easy to tell by their color and by the “NEG” or the “-” icon on the terminal, indicating that it is the negative terminal and not the positive one. This can help you diagnose why you have a new battery but car won’t start without a jump.
-
Connect the final black clip to a metal surface on your car away from the battery
This black clip just needs to be attached to an unpainted metal surface on your car that is away from the battery and will not get in the way of the other connections. Ensure that the surface is unpainted and that it is something that does not have other wires attached to it, like one of the metal struts that can hold your hood open.
-
Start the working car and let the engine run
This allows the engine to warm up and provide the necessary power to the new car that is struggling to perform at the necessary level. This can help prevent the “new battery car won’t start no lights” situation in your vehicle from getting any worse.
-
Try to start your car
If you find that you have a new battery but your car won’t start, you will realize that there is something else wrong, since the jump from the working vehicle will not power up your engine. However, if your car does come on after a jump, you have figured out that the problem can be easily fixed. In this case, you have fixed the “new battery car won’t start no lights” situation.
New Battery Car Won’t Start No Lights Symptoms
If you find that your car needs a jump to start and your battery is not the problem, there are many reasons why you might be experiencing issues with starting your vehicle. Some of these symptoms or clues that there is something wrong in your vehicle is the car making clicking noises, cranking noises, or being completely silent when you turn the key.
Finding out these other reasons is crucial to find out why the “new battery car won’t start no lights” situation. Oftentimes, the reason behind the car clicking is due to a faulty alternator or a broken fuse, which we will talk about later. First, let’s see the most common car won’t start symptoms and how you can troubleshoot, diagnose, and prevent the “new battery car won’t start no lights” syndrome.
-
The car is silent when you turn the key
If this is the case, check the new battery terminal cable connections to see if there are any loose wiring connections or damage to the new battery terminal or the wires. If the vehicle starts when you turn on the engine, you might need to check the cables on the new battery to prevent the “new battery car won’t start no lights” situation.
-
Clicking noise, but won’t start
If you realize that you have a new battery, but your car won’t start, this could be due to improper battery installation. In rare circumstances, mechanics might have installed a dead battery in your car during a replacement and caused your car to make a clicking noise. This improper installation would directly cause your “new battery car won’t start no lights” condition in your car.
-
Cranking noise, but won’t start
If you hear noises, but your car still won’t start, you need to check your engine’s fuel supply. You can diagnose this problem by analyzing the fuel filter, the fuel lines, and the fuel injector. If they are all in good condition, check the spark plugs and see if they are sending electrical sparks and correct timing to your ignition.
-
Stalling While Driving
A car that stalls while you are driving is a dangerous situation, regardless if you are in traffic or when you are cruising down the road. There are common reasons as to why your car stalls while driving, and how to diagnose the problem before it becomes more serious.
When there is too much moisture in the gas, it does not burn properly and disrupts the engine performance. If your car is running in good condition until you fill up your gas tank, the problem is usually caused by moisture in the gas. Excess moisture can be fixed by draining the gas tank or driving until all of the bad gas is used. Preventing poor fuel can prevent issues with the fuses and ignition switch, along with the “new battery car won’t start no lights” syndrome.
Another reason that can lead to “new battery cars won’t start no lights” condition is electrical wiring issues. If you have realized that any of the above reasons does not cause your car stalls while driving, it could be due to the bad electrical wiring. To find out if the cause is the bad wiring, make sure you check the car’s dial speed control system.
By preventing your car from stalling, you can not only prevent the “new battery car won’t start no lights” condition, but also keep the power steering from going faulty. If the car engine stalls while driving, this means that your power steering will be the first thing you notice is that it will not be working anymore.
-
Ignition Switch is Stuck
The second cause of the car won’t start and there are no lights is that the ignition switch might continuously be in the “on” position, causing an overload of the sensor and the “new battery car won’t start no lights” condition.
The ignition switch being stuck can go hand in hand with the ignition cylinder having issues. If the ignition cylinder has broken down over time, you might notice that the ignition switch will not work normally. If the ignition cylinder breaks, this might prevent the vehicle from starting when you turn the ignition key.
Conclusion
A no-start condition can also result from various problems in your car that range in severity and seriousness, so you should bring your car to a local mechanic to determine the root cause of the issue before it gets any worse. Problems that can cause the “new battery car won’t start no lights” condition need to be addressed as soon as possible, to prevent the need for jumping your car or experiencing detrimental symptoms.